Bar Table Service

Here's a picture of the corner pocket of the rail. No folds.

Here's the back side of that rail.

Corner Pocket.

Side Pocket.

Here's a Side Pocket. We use a fold here to prevent damaging the facing.

Here's the back side of that rail.

Slate Corner Pocket.

Slate Side Pocket.

Underneath the slate. In the pocket area. This will be the only place we use glue underneath or on top of the slate, this area doesn't rest on the foundation and won't cause any problems.

We mark the cloth before we stretch it. This gives us the ability to stretch all the tables consistantly and to make sure the cloth is tight.

We have special rates for commercial customers, please contact us by phone for pricing. 714-943-7137

This cloth used in these pictures is Forstmann 10447. We do have more options available, such as Velocity Pro and Simonis.

This slate has adhesive that has built up over the years. The problem's that comes from mechanics that get lazy and don't remove the adhesives are: If the adhesive is on the bottom of the slate, it raises the slate from resting on its foundation along the outer edge, which means the center will sag and rest on the cross-members. If the adhesive is on top of the slate it raises the hieght of the rails causing improper ball response from the rail. Our method uses adhesive only on the side of the slate.